Processing specifications for the leveling machine.

Leveling machines are primarily used to straighten sheet metal of various specifications, as well as cut-to-length sheets. They are suitable for leveling both cold-rolled and hot-rolled steel sheets. Below is an introduction to the key processing specifications of a leveling machine:
1. Processing Length
There are generally upper and lower limits. Exceeding these limits will prevent the sheets from being properly stacked.
2. Processing Speed
This includes threading speed, constant speed, and variable speed. These parameters primarily affect the overall processing efficiency.
3. Processing Width
There are generally upper and lower limits. Exceeding the upper limit will prevent the coil from being loaded, while falling below the lower limit will prevent proper centering.
4. Processing Weight
There is typically an upper weight limit. If a steel coil exceeds this limit, the loading car will be unable to operate, and it may even cause damage to the hydraulic cylinders.
5. Processing Thickness
Every leveling machine has upper and lower thickness limits. Exceeding these limits will result in poor shearing quality and may even cause damage to the cutting blades.